View AP12B070046A_8138071.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

page 1 of 13 specifcation part no. ap.12b.07.0046a product name 12mm two stage active gps patch antenna feature ultra miniature gps active patch high performance ultra low power consumption rohs compliant ap.12b.07.0046a spe-11-8-126/b |
page 2 of 13 this miniaturised gps active antenna module combines a tiny 12mm squared ceramic patch antenna from cirocomm with a two stage low noise amplifer. it is available as a plug and play format for onboard integration with gps receiver modules via ultra thin coaxial cable and connector from ipex. only 5.5mm in height, this new taoglas active antenna module utilises xtremegain? technology for the highest industry sensitivity. designed for use with the new generation of gps receiver modules using chipsets from sirf, ublox, nemerix, fastrax, navsync, falcom, telit, tyco, siemens etc. 1. introduction antenna lna*2 i-pex + cable spe-11-8-126/b |
page 3 of 13 2. specifcation 2.1 patch antenna 2.2 lna parameter specifcation frequency 1575.42 1.023mhz antenna gain typ 1.5 dbic @ zenith(13.4mm*13.4mm ground plane) impedance 50 polarization rhcp axial ratio max 4.0db @ zenith patch dimension 12mm x 12mm x 3.5mm parameter specifcation frequency 1575.42 1.023mhz output impedance 50 output vswr 2.0 max pout at 1db gain compression point +5dbm typ. lna gain, power consumption and noise figure voltage lna gain (typ) power consumption(ma) typ noise figure typ min. 1.8v 9db 2.5ma 4.5db typ. 3.0v 25db 10ma 1.6db max. 5.5v 28db 22ma 1.6db parameter specifcation rf cable coaxial cable ? 1.13 0.1mm, length 46 2.5mm connector ipex mhfi (u.fl) 2.3 cable* & connector spe-11-8-126/b |
page 4 of 13 3. lna gain and out band rejection @3.0v 1 tr1 s21 log mag 10.00db/ ref -40.00db (f2) 1 center 1.57542 ghz span 400 mhz 13/20 cor ifbw 70 khz cg1 tr1 s21 > 1 1.5754200 ghz 25.487 db cg1 tr1 s21 2 1.6054200 ghz 25.290 db cg1 tr1 s21 3 1.5454200 ghz 25.698 db cg1 tr1 s21 4 1.6254200 ghz 25.144 db cg1 tr1 s21 5 1.5254200 ghz 25.765 db cg1 tr1 s21 6 1.6754200 ghz 24.765 db cg1 tr1 s21 7 1.4754200 ghz 26.085 db 60.00 50.00 40.00 30.00 20.00 10.00 0.000 -10.00 -20.00 -30.00 -40.00 >1 1.5754200 ghz 25.487 db 2 3 5 7 4 1 active ch/trace 2 response 3 stimulus 4 mkr/analysis 5 instr state 1 6 spe-11-8-126/b |
page 5 of 13 4. lna noise figure @3.0v 5. total specifcation (through antenna, lna, cable and connector) parameter specifcation frequency 1575.42 1.023mhz gain@3v 23.5 4dbic @ 90 output impedance 50 polarization rhcp output vswr max 2.0 operation temperature -40c to + 85c storage temperature -40c to + 85c relative humidity 40% to 95% input voltage min. 1.8v, typ. 3.0v, max. 5.5v 1 40.00 gain scale/ 5.000 db -10.00 mkr1 1.5754 ghz 1.630 db 24.579 db center 1.57542 ghz bw 4 mhz points 11 span 3.00 mhz tcold 296.50 k avgs off att 0/ - - db loss off corr 9.000 nfig scale/ 1.000 db -1.000 1 spe-11-8-126/b |
page 6 of 13 6. radiation patterns spec no. sp03b115750-2660 issued date 2011/8/15 published by version 01 product name gps board/gba-900zl page 5/8 all right reserved by cirocomm technology corporation. 6.0 outline a double-coated adhesive tape tape dimension unit:mm tolerance : +/- 0.2 7.0 radiation patterns xz-plane yz-plane spec no. sp03b115750-2660 issued date 2011/8/15 published by version 01 product name gps board/gba-900zl page 5/8 all right reserved by cirocomm technology corporation. 6.0 outline a double-coated adhesive tape tape dimension unit:mm tolerance : +/- 0.2 7.0 radiation patterns spe-11-8-126/b |
1 -5 -10 - 15 -20 -25 -30 -35 -40 90 270 180 0 page 7 of 13 6.1 xz plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.12b.07.0046a xz 1575.42 -1.22 / 351.00 -7.31 / 240.00 -3.42 rhcp 2011/7/21 spe-11-8-126/b |
1 -5 -10 - 15 -20 -25 -30 -35 -40 0 90 270 180 page 8 of 13 6.2 yz plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.12b.07.0046a yz 1575.42 -1.85 / 4.00 -28.22 / 110.00 -6.12 rhcp 2011/7/21 spe-11-8-126/b |
1 -5 -10 - 15 -20 -25 -30 -35 -40 0 90 270 180 page 9 of 13 6.3 xy plane radiation pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.12b.07.0046a xz 1575.42 -1.22 / 351.00 -7.31 / 240.00 -3.42 rhcp 2011/7/21 2 ap.12b.07.0046a yz 1575.42 -1.85/ 4.00 -28.22 / 110.00 -6.12 rhcp 2011/7/21 spe-11-8-126/b |
page 10 of 13 7. technical drawing this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre ipex mhf1 "a" name material finish qty ap.12b patch(12*12*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 1.13 coaxial cable ipex mhf1 connector 1 5 white liner nitto 5015 double sided adhesive 1 4 tin plated tin (spte) shielding case 1 6 green fr4 0.5t ap.12b pcb notes: 1.soldered area 2.shielding case area 3.double sided adhesive area. 4.all material must be rohs compliant. 5. the connector orientation has a fixed position to the antenna as per drawing. top side bottom a all initial design sandy 2011/1 1/15 p/n ap.12b od.1 13.j ipex.mhfi.113 b e2 amend part of the size sandy 2012/04/11 b note: 1. 2. 3. all material must be rohs compliant. 4. the connector orientation has a fxed position to the antenna as per drawing. name p/n material finish qty ap.12b patch(12*12*4mm) ap.12b 1.13 coaxial cable od.113.j 3 ipex mhf1 connector ipex.mhfi.113 brass 4 tin (spte) nitto 5015 white liner 6 ap.12b pcb fr4 0.5t this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre ipex mhf1 "a" name material finish qty ap.12b patch(12*12*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 1.13 coaxial cable ipex mhf1 connector 1 5 white liner nitto 5015 double sided adhesive 1 4 tin plated tin (spte) shielding case 1 6 green fr4 0.5t ap.12b pcb notes: 1.soldered area 2.shielding case area 3.double sided adhesive area. 4.all material must be rohs compliant. 5. the connector orientation has a fixed position to the antenna as per drawing. top side bottom a all initial design sandy 2011/1 1/15 p/n ap.12b od.1 13.j ipex.mhfi.113 b e2 amend part of the size sandy 2012/04/11 b spe-11-8-126/b |
page 11 of 13 7.1 connector drawing this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre ipex mhf1 "a" name material finish qty ap.12b patch(12*12*4mm) ceramic clear 1 1 1 1 fep gray 2 3 gold brass 1.13 coaxial cable ipex mhf1 connector 1 5 white liner nitto 5015 double sided adhesive 1 4 tin plated tin (spte) shielding case 1 6 green fr4 0.5t ap.12b pcb notes: 1.soldered area 2.shielding case area 3.double sided adhesive area. 4.all material must be rohs compliant. 5. the connector orientation has a fixed position to the antenna as per drawing. top side bottom a all initial design sandy 2011/1 1/15 p/n ap.12b od.1 13.j ipex.mhfi.113 b e2 amend part of the size sandy 2012/04/11 b spe-11-8-126/b |
page 12 of 13 8. plugs usage precautions (1) to disconnect connectors, insert the end portion of i-pex under the connector fanges and pull off vertically, in the direc - tion of the connector mating axis. (2) to mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. the click will confrm fully mated connection. do not attempt to insert on an extreme angle. after the connectors are mated, do not apply a load to the cable in excess of the values indicated in the diagram below. 8.1 mating / unmating 8.2 pull forces on the cable after connectors are mated 2 1 coaxial cable plug pulling tool p/n : 90192-001 receptacle plug rece 2n max. 2n max. 4n max. coaxial cable spe-11-8-126/b |
page 13 of 13 9. packaging taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifcations and product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third parties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd. spe-11-8-126/b |

▲Up To Search▲

Price & Availability of AP12B070046A

	To Download AP12B070046A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .